Main Wash - mabe LMA80BYI1 Manual Del Usuario

main wash

FUZZY Wash Program
• FUZZY wash program is the easiest, most convenient and most
common washing program. When the user presses the POWER pad
and then START/PAUSE, the FUZZY wash program will start to
work.
• When the washer starts, the digital display shows the remaining
time. The REMAINING TIME indicator light will flash.
Detailed steps
1. Press the POWER pad.
2. According to the size of the load, select the proper water level.
3. Press the START/PAUSE pad.
Single washing procedure
• The user may select any single procedure, or a combination of pro-
cedures among SOIL LEVEL (WASH), RINSE TYPE (RINSE) and SPIN
LEVEL (SPIN) according to actual requirements. It is required to
turn off any one or two of the three indicators that will not be re-
quired, keeping only one indicator lighted.
• SOIL LEVEL (WASH Only) — After turning on the power, turn off
the RINSE TYPE (RINSE) and SPIN LEVEL (SPIN) indicators by press-
ing those two pads. The procedure to select RINSE TYPE (RINSE)
only and SPIN LEVEL (SPIN) Only is similar.
• SOIL LEVEL (WASH) & SPIN LEVEL (SPIN) – After turning on the
power, turn off the RINSE TYPE (RINSE) indicator by pressing that
pad. RINSE TYPE (RINSE) & SPIN LEVEL (SPIN) as well as SOIL LEVEL
(WASH) & RINSE TYPE (RINSE) are selected in the same way.
Using the detergent for two different loads
1. Add the first load, the detergent and select SOIL LEVEL (WASH)
only.
2. Remove the first load from the washer after hearing the buzzer
signal.
3. Add a second load into de tub and run a complete SOIL LEVEL
(WASH), RINSE TYPE (RINSE) and SPIN LEVEL (SPIN) cycle.
4. Remove the second load from the washer after hearing the
buzzer signal.
5. Add the first load into the tub and select RINSE TYPE (RINSE) and
SPIN LEVEL (SPIN) only.
Important:
• Washer lid must remain closed when the machine is running, oth-
erwise it will stop working during spin and will send an error
warning.
• The washer will not start if water does not reach the set water
level.
39