Philips AJ 3935 Manual Del Usuario página 7

CD PLAYBACK
1. Press OPEN•CLOSE to open the CD door.
2. Insert a CD with the printed side facing up, and press the door
close.
3. Press PLAY•PAUSE ); to start playback.
• The display shows in sequence briefly:
CD indicator CD
current track number.
• 'door' is shown if you have not closed the CD door.
• If no CD has been inserted,
display and 'no Cd' flashes.
– The display returns to standby clock time.
• At the beginning of each track, the track number is
displayed briefly and
4. Adjust the sound with VOLUME 4 or 3.
5. To interrupt, press PLAY•PAUSE );.
• The current track number shows briefly before returning to
clock time. CD continues to flash when pause is activated.
6. Press PLAY•PAUSE ); again to resume playback.
• The current track number shows briefly before returning to
clock time.
7. Press 9 STOP•OFF to stop playback.
• CD disappears from the display and the CD player is
switched off.
• The set automatically returns to standby clock time after the
last track.
Selecting a different track during playback
The track number appears briefly in the display when you press
SEARCH ∞ or § to skip tracks.
• Press § once or more to skip to the next track(s).
• Press ∞ more than once to skip to previous tracks.
• Press ∞ once and playback will return to the beginning of
the current track.
Finding a passage within a track
1. During playback, press and hold down SEARCH ∞ or §.
– The CD is played at high speed and low volume; the display
shows 'Cd:' and your current track number.
2. Release the SEARCH ∞ or § when you recognize the
passage you want.
– Normal CD playback and standby clock time resumes.
Note:
The UP7 and DOWN8 keys can also function as the CD SEARCH
∞ , § controls.
, 'Cd: --' ; the total number of tracks;
CD disappears from the
CD remains throughout CD playback.
CD OPERATION
CD
7