Sauder Office Port 408289 Manual Del Usuario página 14

Step 9 Step
Fasten the ENDS (A3 and B3) and UPRIGHTS (C3 and D3)
å
to the TOP (E3). Tighten eight TWIST-LOCK® FASTENERS.
B3
These holes must be here.
Page 14
Notched edge
C3
D3
E3
408289
How to use the SAUDER TWIST-LOCK® FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
A3
Dowel end
Notched edge
www.sauder.com/services