Sauder Office Port 408289 Manual Del Usuario página 26

Step 21
Insert a SLIDE CAM (10A) into the large holes in the DRAWER SIDES (D107 and D108).
å
Fasten the NUMBERED DRAWER SLIDES (EE and FF) to the DRAWER SIDES (D107 and D108).
å
Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and "DRAWER LEFT" for
å
easy identifi cation.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a PULL (96K) to the DRAWER FRONT (O). Use two BLACK 1" PAN HEAD SCREWS (60S).
å
Repeat this step for the other small drawers.
å
FF
2
3
Page 26
Roller end
10A
1
D108
96K
O
BLACK 1" PAN HEAD SCREW
(8 used for the PULLS)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D107
2
3
408289
60S
10A
Roller end
1
EE
(4 screws per drawer)
3S
GOLD 5/16" FLAT HEAD SCREW
(16 used for the DRAWER SLIDES)
www.sauder.com/services