RISCO Group LightSYS Manual Del Usuario página 5

Function Keys
Numeric Keys
Keypad Settings
Note:
The following settings must be defined individually for each keypad connected to the system.
To define keypad settings, follow this procedure:
1. Press for two seconds until the Keypad Settings menu appears.
2. Select the relevant icon using the
Note:
• The LightSyS Language option can always be accessed by simultaneously
pressing
• For ProSYS versions prior to 5, set the keypad language according to the panel
language.
Note:
Select RP432 when the keypad is connected to the LightSYS (default) or RP128
when the keypad is connected to ProSYS.
Used to arm (set) groups of zones (by default) or to
activate a prerecorded series of commands (macros).
To activate press for 2 seconds.
Used to input numbers when required.
and
Brightness
Contrast
Keypad's buzzer volume
Language (ProSYS mode only)
and .
Panel RP432/RP128 (ProSYS)
keys. To enter option, press:
5