Assembly Inumbra On Gargantua; Assembly Inumbrina On Gargantua - Extremis GARGANTUA Instrucciones De Montaje

ASSEMBLY INUMBRA IN GARGANTUA
WHAT YOU NEED
1 person
no. 5 hex key
+/- 20 min.
ASSEMBLY INUMBRINA IN GARGANTUA
WHAT YOU NEED
1 person
no. 5 hex key
+/- 20 min.
1. Your assembled Gargantua table has a
central cube, which keeps the four legs
together (see Gargantua manual).
Remove this cube and replace it with
the special parasol cube. Make sure its
conical part is facing upwards and is
protruding from the tabletop.
Fasten the attaching part to the central
metal part connecting the 4 Gargantua
legs, as shown in the drawing.
2. Install the parasol's tube onto the
stainless steel tube as explained in point
6 - 7 - 8 of assembly option 1 (page 21).
Now reassemble your Gargantua table.
Insert the Inumbrina parasol in the
Gargantua anchor tube and fasten it by
turning the adjusting screw clockwise.
Always tighten the adjusting screw until
the Inumbrina can no longer revolve on
its axle.
english 9