Brizo MultiChoice T75P588 Serie Manual Del Propietário página 4

T75P Series Installation
2
Diverter Cartridge Installation
A.
1
4
3
FOR DIVERTER CARTRIDGE INSTALLATION:
Apply silicone lube to the o-ring (2) to make
the diverter sleeve (3) easier to install diverter
cartridge. Rotate the diverter cartridge (1) so
the pin is at the bottom for proper installation.
Apply silicone lube to the o-rings (4) to make
the diverter sleeve (3) easier to install diverter
cartridge. Align diverter sleeve so that the
notches are in the same position as the notches
on rough-in body (5).
92658 Rev. A
5
2
B.
5
1
Slip-On Installation
Slide bonnet nut (1) over diverter sleeve (2) and
thread into rough-in body.
Hand tighten securely.
4
2