sauermann SI-CA 030 Guia De Inicio Rapido página 5

Set the time pressing
OK on each line, use
Up and Down keys
to select the correct
item and validate
with OK then go to
"Next".
The probe can be inserted in the chimney.
The analyzer displays the measurements.
5 ON / OFF
During autozero, DO NOT insert the gas probe in the chimney.
Keep pressed for 3 seconds to turn on the analyzer.
Once the autozero is finished, insert the gas probe in the chimney
and gas measurments are displayed.
Keep pressed for 3 seconds to turn off the analyzer.
Before powering off, disconnect hoses from the analyzer and
empty and dry the water trap.
Set your time zone
pressing OK on each
line, use Up and
Down keys to select
the correct item and
validate with OK
then go to "Next".
Select if you want Autozero is in progess.
your pump turned
ON or OFF after
Auto-Zero pressing
OK then go to
"Save".