Handle Assembly; Assembly Instructions - Kenmore 125.81214610 Manual De Uso Y Cuidado

Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given. WARNING statements alert you to such dangers as fire, electric
shock, burns and personal injury. CAUTION statements alert you to such dangers
as personal injury and/or property damage.
Before assembling vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received and identified all the components of your new Kenmore
vacuum cleaner.
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply until
assembly is complete. Failure to do so
could result in electrical shock or injury.
POWERMATE
Align wand and insert
onto PowerMate until
®
the wand locks into
place.

HANDLE ASSEMBLY

Insert wand into handle
until lock button snaps
inplace.
To remove: Press wand
release button and pull
up on handle.
To store: Disconnect hose
from wand and canister
to prevent stress on hose
during storage. Store
hose in a loosely coiled
position so the hose
covering is not stressed.

ASSEMBLY INSTRUCTIONS

®
WANDS
Align the wand and
insert the upper wand
into the lower wand
until lock button snaps
in place.
Connect the plug to
the hand assembly
and lock the cord
onto the cord retainer.
ATTACHMENT HOLDER
Align the attachment holder clip with the
front of wand. Push and snap into place
on wand.
- 8 -