Exhaust Filter Changing - Kenmore 125.81214610 Manual De Uso Y Cuidado

WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter
installed. Do not operate without filter
cover installed.
EXHAUST FILTER - HEPA MEDIA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTS for part
number and purchase details (page 5).
1. Push latch up to release the exhaust filter
cover from slot in canister.
2. Pull filter cover down and outward to
remove it from filter chamber in the canister.
3. Remove the exhaust filter cartridge from
the filter cover.

EXHAUST FILTER CHANGING

- 18 -
4. Insert the new exhaust filter cartridge
into the filter cover with the rubber seal
upward.
5. To replace the exhaust filter cover,
insert the two tabs on the cover into
the slots at the top of the filter chamber.
6. Rotate filter cover down until it snaps into
place.