Specifications; Supplied Accessories - Sony Psp2 SCPH-70011 Manual De Instrucciones

Specifications

General
Power requirements
Electrical current consumption
(approx.)
Console dimensions (approx.)
Console mass (approx.)
Signal format
Operating temperature
Inputs/outputs on the console
front
Inputs/outputs on the console
rear
50
Specifications
!
DC IN 8.5V
5.3 A
230 × 28 × 152 mm / 9 × 1 × 6 in (w/h/d)
900 g / 2 lbs
NTSC
5°C to 35°C / 41°F to 95°F
Controller port (2)
MEMORY CARD slot (2)
USB connector (2)
NETWORK connector
LINE connector
! DC IN 8.5V connector
AV MULTI OUT connector
DIGITAL OUT (OPTICAL) connector
AC adaptor
Power requirements 100-240 V AC, 50/60 Hz
Voltage/electrical current 8.5 V, 5.65 A
output (approx.)
Adaptor dimensions (approx.) 60 × 28 × 124 mm / 2
Adaptor mass (approx.) 350 g / 12 oz

Supplied accessories

page 10
Design and specifications are subject to change without notice.
Copyrights
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
This product is manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All
rights reserved.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems,
Inc.
3 / × 1 × 4 7 / in (w/h/d)
8 8