Publicidad
7
7
Y
Fasten four ANGLE BRACKETS (Y) to each SMALL SKIRT (T) as shown in the upper diagram. Use eight BROWN 7/16" LARGE
HEAD SCREWS (GG).
NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edges of the SMALL SKIRTS.
Position SMALL ENDS (B and D) and SMALL UPRIGHTS (F2 and H2) as shown in the lower diagrams.
Fasten the SMALL SKIRTS (T) to the SMALL ENDS (B and D) and SMALL UPRIGHTS (F2 and H2). Use eight BROWN
7/16" LARGE HEAD SCREWS (GG) through the ANGLE BRACKETS (Y).
413044
T
Unfi nished edge
T
D
www.sauder.com/services
T
Angle Brackets
will be further
from this edge.
H2
N
Y
Angle Brackets
will be further
from this edge.
Unfi nished edge
T
N
F2
BROWN 7/16" LARGE HEAD SCREW
(16 used in this step)
B
GG
Page 11
Publicidad
