14
14
WARNING
Never use this furniture with a TV that is
too large or too heavy. Severe injury or
death can occur. The TV and furniture
will be unstable and may tip.
- The TV must weigh less than 50 lbs.
- The base of the TV must be able to sit
completely on this shelf.
We recommend using the SAFETY BRACKET (BB) for added stability.
Use a BROWN 7/16" LARGE HEAD SCREW (GG) into the top of the unit
and a BLACK 1-7/8" FLAT HEAD SCREW (FF) into a stud in your wall.
Apply the WARNING LABEL (EE) to the TV SHELF (L). You should be able to read the label when the TV is removed from the
unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
To help prevent the TV from sliding, place the ANTI-SKID PAD (DD) under the front support of the TV or divide among the front
supports if more than one.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 18
7 lbs.
7 lbs.
7 lbs.
7 lbs.
L
7 lbs.
www.sauder.com/services
BB
BROWN 7/16" LARGE HEAD SCREW
20 lbs.
DD
EE
50 lbs.
30 lbs.
30 lbs.
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
(1 used into the top of your unit)
7 lbs.
7 lbs.
7 lbs.
7 lbs.
7 lbs.
FF
GG
413044