Sauder Harbor View 158015 Manual Del Usuario página 20

Step 15
Insert a SLIDE CAM (VV) into the SMALL DRAWER SIDES (D24 and D25).
å
Fasten a DRAWER RIGHT (35AC) to the SMALL DRAWER RIGHT SIDE (D24) and a DRAWER LEFT (35AD) to the SMALL
å
DRAWER LEFT SIDE (D25). Use four GOLD 5/16" FLAT HEAD SCREWS (MM) through holes #1 and #2.
NOTE: The glides are not intended to rotate.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten two KNOBS (DD) to the SMALL DRAWER FRONT (L2). Use two BLACK 1-1/4" FLAT HEAD SCREWS (KK).
å
Repeat this step for the LARGE DRAWERS.
å
2
Page 20
Glide end
1
D25
L2
DD
GOLD 5/16" FLAT HEAD SCREW
VIEW THE DRAWER GLIDE VIDEO
BLACK 1-1/4" FLAT HEAD SCREW
VV
MM
(20 used in this step)
158015
KK
(10 used for the KNOBS)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
VV
D24
2
www.sauder.com/services
Glide end
1