Sauder Harbor View 158015 Manual Del Usuario página 6

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (CC) into the large holes in the BRACES (D and E).
Insert four METAL PINS (GG) into the small holes in the short
å
edges of the LOWER BRACES (D).
(7 used)
Do not push TWIST-LOCK®
FASTENERS into these holes.
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
CC
E
CC
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1423
to watch a video on how to assemble your unit.
GG
D
D
158015
CC
Do not push TWIST-LOCK®
FASTENERS into these holes.
www.sauder.com/services