KTM Power Parts 61408915044 Manual Del Usuario página 6

6
Scope of supply
1x license plate holder, short
1x license plate base (preassembled)
2x screws M5x12
Preparatory work
- Take off the passenger seat (see the Owner's Manual).
Disassembling the original license plate holder
- Disconnect plug-in connector
- Remove screws .
- Remove original license plate holder with wiring harness.
Disassembling the turn signal
- Remove screws .
- Take off the cover.
- Remove screws .
- Remove screws .
- Take off the holder.
- Pull off cover .
- Disconnect plug-in connector
cover .
for lighting.
for license plate lamp and remove