Service - Xerox GBC Fusion Punch II Guia Del Usuario

CAUTION: In case of emergency, use the power cord as a main disconnect
device!
The FusionPunch II must be connected to a supply voltage
n
corresponding to the electrical rating in the machine operating
instructions (also listed on the serial number label).
The socket-outlet shall be located near the equipment and shall be
n
easily accessible.
The grounding plug is a safety feature and will only fit into the proper
n
grounding-type power outlet. If you are unable to insert the plug into an
outlet, contact a qualified electrician to have a suitable outlet installed.
Do not alter the plug on the end of the cordset (if provided) of the
FusionPunch II. It was provided for your safety.
Unplug the FusionPunch II before moving the machine or whenever
n
the machine is not in use for an extended period of time.
Do not operate the FusionPunch II if the machine has a damaged
n
power supply cord or plug. Do not operate the machine after any
malfunction, if liquid has been spilled into the machine, or if the
machine has been damaged in any way.
Do not overload electrical outlets beyond their capacity. To do so can
n
result in fire or electrical shock.

SERVICE

Do not attempt to service your FusionPunch II yourself. Contact an
n
authorized GBC service representative for any required repairs or major
maintenance for your FusionPunch II.
DO NOT REMOVE THE MACHINE'S COVERS
There are NO user-serviceable parts inside the machine. Removal of the
n
covers by the user could result in potential personal injury and/or
property or machine damage.
FusionPunch II User Guide Preface vii