Xerox GBC Fusion Punch II Guia Del Usuario página 76

Error Messages
From the Printer
The following is a listing of Punch-related error messages that could appear
on the Host Printer display screen. Also included are a description of the
possible causes and the resolution for each problem.
Error Message
DocuTech 135:
Clear External Finisher
to run jobs to the
Bypass Transport/
External Finisher not
ready.
DocuTech 135:
External Finisher Full.
DocuTech 61XX:
Clear External Finisher
to run jobs to the
Bypass Transport or
External Finisher not
ready.
Error Messages
Possible Cause
1. The current job has
a fault and must be
reset.
2. The FusionPunch II
is not Online.
The Punch has filled
the Stacker and is
waiting to be
emptied.
The FusionPunch II
is not Online.
Figure 3-3: Printer-Generated Error Messages
Resolution
1. Click on the Printer icon.
If there is a reset option,
select Reset .
2. Press Stop/Reset
at the Punch and then press
"ONLINE/OFFLINE".
Ensure that the Punch is in
the Online mode and then
press Start .
Unload the Stacker and
then restart the Punch
Online.
Press Stop/Reset
at the Punch and then press
"ONLINE/OFFLINE".
Ensure that the Punch is in
the Online mode and then
press Start .
3
3-5