Serta 45752 Instrucciones De Ensamblaje página 6

Step 2
Align Seat Plate (4) over pre-drilled holes on the
underside of the Seat Cushion (6) with black tension knob
facing the front of the seat. Attach the Seat Plate (4) to
Seat Cushion (6) using 2 Bolts (A2) in the front holes of
Seat Plate (4) and 2 Bolts (A1) in the rear holes of Seat
Plate (4) as shown. Tighten all the screws with the
enclosed Allen Key (B). Be careful not to cross thread
bolts or damage the seat.
B A A
A A
A 1
5
Customer Service Support: 1-800-379-9773
A A
A 2
4
6 6
Step 7
Press the Plastic Caps (C) into the Armrest holes to cover
bolts.
NOTE 1:Before using your Executive Chair, ensure that all
the Bolts are tightened fully for safety.
NOTE 2: Please keep the enclosed Allen Keys and check all
bolts periodically to ensure these remain tightly fastened.
6 C
Customer Service Support: 1-800-379-9773
Assembly Instruction
C
10