Ast Number Edial; Lash; Last Number Redial; Hold - GE 21091 Guía Del Usario

Waiting calls. During a phone call you will hear a beep, which indicates
another call is waiting on the line, and Caller ID information shows in the
handset display. To connect to the waiting call, press the flash button on the
handset or base, and your original call is put on hold. You may switch back
and forth between the two calls by pressing the flash button.
F

LASH

Use the flash button on the handset or base to activate custom calling
services, such as call waiting, which are available through your local
phone company.
TIP: Don't press the talk/callback button on the handset or the speaker/
callback button on the base to activate a custom calling service, such as call
waiting, or you'll hang up the phone.
L N
AST UMBER
To quickly redial the last number you dialed:
1. Press the talk/callback button on the handset or the speaker/callback
button on the base.
2. Press the redial button.
-OR-
3. Press the redial button first then press the talk/callback button or the
speaker/callback button.
-OR-
4. If you get a busy signal and want to keep dialing the number, press the
redial button to quickly redial the
H
OLD
When you are on the phone, press the HOLD soft key on the handset or
base to put a call on hold. LINE ON HOLD shows in the handset display.
R
EDIAL
LINE ON HOLD
TALK 00:10 VOL 2
CONF
number.
EXIT
TRANS
29