Storing A Name And N Memory - GE 21091 Guía Del Usario

S N
TORING A AME AND
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key.
3. Press the desired memory location button (01 through 50) or, use the cid/
vol ( or ) button on handset or CID/messages (
base to select the memory location. If the memory location is occupied, the
memory location and stored name and number appear in the display. If the
memory location is empty, EMPTY shows in the display.
4. Press the EDIT soft key. The display shows ENTER NAME .
5. Use the touch-tone pad on your handset or base to enter a name (up to
15 characters). More than one letter is stored in each of the number
keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Wait for 1 second. Press the 5 key 3 times for the second letter L,
38
N M
UMBER IN EMORY
NAME
HANDSET 1
MENU
SELECT MEMORY
01-50
* * EMPTY * *
EDIT DEL
ENTER NAME
OK DEL
DIR
or ) button on the
- -
MEMO
EXIT
0 3
MEMO
EXIT
0 3
MEMO
EXIT