Steering; The Brake; The Push Bar; The Pram Body - Mutsy EVO Manual De Instrucciones

Ocultar thumbs Ver también para EVO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

until you hear a click. Pull the wheel to check that it has been attached
firmly.
Disassemble the front wheels (g)
· Push the button on the front side of the front wheel and pull the wheel
from the front wheel housing.

Steering

The swivelling wheels (h)
· Turn the ring above the front wheel on both sides inwards to lock the
swivelling wheels. The swivelling wheels will automatically be locked
when the wheels are placed in the driving direction.
· Turn the ring above the front wheel on both sides outwards to unlock
the swivelling wheels.
The brake (i)
· A brake pedal is available in the centre of the rear axle. Push the pedal
downwards with your foot to block the brake. Push the pedal upwards
with your foot to unblock the brake.
The push bar (c)
· Push the buttons on both sides of the push bar and turn the push bar
upwards.
· The push bar has 4 different height positions. Release the buttons
when the push bar is in the desired position.

The pram body

· The pram body is suitable for transporting children from birth up to 33
lbs. (15 kg) and 30 inch (76 cm) in height, in a lying position.
· The pram body is not suitable for children who can sit or roll indepen-
dently or who can raise themselves on their hands and knees.
· This pram body can only be used on the frame and not as a stand-
alone cot.
· Regularly check the bottom and the borders of the pram body on wear
and tear.
· Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Place the pram body adapters (j)
· There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
· The adapter marked with 'R' is placed on the right side of the frame, the
8

Publicidad

Tabla de contenido
loading

Tabla de contenido