Mutsy EVO Manual De Instrucciones página 16

Ocultar thumbs Ver también para EVO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

· The seat can be folded and unfolded with the frame and does therefore
not need to be removed from the frame.
· The back support and leg support are adjustable.
· Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Assembly on the frame (p)
· There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
· Stand at the front side of the frame.
· Hold the seat on both sides at the unlock buttons above the attach-
ment points and push the chair downwards until you hear a click.
· Check that the seat has been attached solidly by trying to lift it from
the frame.
Assembly on the frame (the child faces the parent) (q)
· There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
· Stand at the front side of the frame.
· Hold the seat on both sides at the unlock buttons above the attach-
ment points and push the chair downwards until you hear a click.
· Check that the seat has been attached solidly by trying to lift it from
the frame.
Remove the seat
· Stand at the front side of the frame.
· Hold the seat on both sides at the unlock buttons and pull the buttons
upwards with your fingers. The seat can vertically be removed from the
attachment points.
Fold the frame with the seat directed forwards
· Stand behind the frame and make sure that the back support of the
seat is standing upright.
· Push the buttons on both sides of the push bar and turn the push bar
downwards until it has reached its lowest position.
· This position is indicated by means of a marking on the hinge point.
· Pull the unlock buttons on the inside of the frame towards you and
then push the top part of the frame downwards.
· Pull the button at the back of the seat upwards, hold this upwards and
tilt the back support of the seat backwards until it is fully flat.
· Push the buttons on both sides of the leg support and push the leg
support fully downwards.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido