Kohler K-4108 Guia De Instalacion página 9

Clips Clips
Hose
5. Install the Seat and Hose
Position the Seat
Slide the seat onto the mounting plate until you feel it snap into
place.
Check the positioning of the seat. Adjust the position if needed.
Adjust the Seat
To adjust the seat position, remove the seat by pressing the
release button in and sliding the seat forward.
Reposition the mounting plate as needed.
Install the Seat
Securely tighten the mounting plate bolts.
Install the seat.
Install the Hose
IMPORTANT! Risk of product damage. Do not cross-thread the
hose-to-seat connection.
Connect the supply hose to the bidet seat. Do not overtighten.
Use the supplied clips to attach the power cord and supply hose
to each other.
Kohler Co.
Mounting Plate
Release Button
9 1194356-2-A