Hunter Low Profile 90055 Instrucciones página 8

New Construction – suspended between joists
B11
Slide the mounting rails into brackets.
B13
Mark position of screws by using holes as a template.
B15
Insert screws, leaving space between the screw
head and the joist. Screws are not provided.
8
41719_EngS_3.29.06.indd 8
E
D
E
B12
5/8
1/2
Position the correct depth mark at the bottom edge of
the joist based on the thickness of your sheetrock.
B14
Drill a hole in the center of each outline.
B16
Attach the rails onto the screws.
5/8
1/2
1/8" Bit
41719-01 3/29/2006
3/29/06 9:16:33 PM