Publicidad
4
care of your product
Periodically check all fittings to ensure that none have come loose.
Your cot can be cleaned by wiping with a damp cloth and drying
with a soft dry cloth.
Never clean with abrasive, ammonia based, bleach based, or
spirit type cleaners.
Take care when handling or moving the cot. Careless handling
can damage wooden furniture.
5
The lowest base position is the safest and should always be used
as soon as the baby is old enough to sit up.
Never leave anything inside the cot that could provide a foothold
or present a risk of suffocation or strangulation.
The thickness of the mattress chosen must not reduce the internal
depth (from mattress surface to top of the side) to less than
500mm with the base in the lowest position or 200mm with the
base in the highest position.
The leg of the cot has a mark indicating this height.
All assembly fittings should always be tightened properly . Care
should be taken that no screws are loose, because the child could
trap parts of the body or clothing (e.g. Strings, necklaces, ribbons
for babies' dummies) which would pose a risk of strangulation.
The mattress to be used with this cot should be no more than
30mm shorter or narrower than the internal length or width of the
cot.
Strong heat sources, e.g. open, electric or gas fires in the vicinity of
the cot may be dangerous if placed near the cot.
6
safety notes
2
parts check list
Fixed side / Lado fijo
Mattress base / Base del colchón
2 Mattress base rails
2 Soportes para la base del colchón
assembly
3
the mattress base
1
1
2
3
catálogo de piezas
2 Ends
2 Exremos
montaje
la base del colchón
Attach the mattress base rails to the ends,
in the higher (1) middle (2) or lower (3)
position, using the bolts and barrel nuts, as
shown. The lowest position is the safest
(please see Section 6, safety notes).
To ease assembly, do not over tighten
fittings at this stage.
Place the mattress base on the battens
attached to the inside faces of the rails.
Asegure los soportes para la base del
colchón a los extremos, en la posición más
alta (1)mediana (2), o más baja (3)
utilizando los pernos y los manguitos
roscados. Nótese que la posición mas
baja es la más segura (Véase el Artículo 6,
medidas de seguridad). Para facilitar
montaje, todavía no apriete totalmente
los accesorios.
Coloque la base del colchón entre los
soportes.
3
Publicidad
