Quick Repairs - Bradley Professional Serie Manual Del Usuario

QUICK REPAIRS

Only an authorized technician may work on electrical repairs on this appliance.
Bradley Technologies Canada Inc. accepts no responsibility for any malfunction or damage which is
caused by unsuitable electrical repairs.
Main heating element replacement
This error occurs when one or both of the elements are not supplying heat to the
cabinet. The operating system compares the target set point with actual temperature. If
the temperature is 8 degrees less than a target, the alarm will be displayed and beeping
alarm will sound.
To Change the heating element follow these steps:
1. Turn off the power switch. See the Switch (9) location on page 7
2. Disconnect the power cable from the electrical outlet.
3. Ensure adequate time to cool down the smoker after use
4. Remove the phillips screw (1) located on top of the heating element cover (2)
5. Turn the heating element cover (2) counter clocwise and pull it gently out
6. Disconnect the electrical cable from the heating element
7. Pull the heating element out from it's socket
23 | P a g e