Sauder 418299 Manual Del Usuario página 27

Step 22 Step
1
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D267
Groove
Fasten the PENCIL DRAWER SIDES (D266 and D267)
å
and PENCIL DRAWER BRACE (EE) to the PENCIL
DRAWER BACK (D474). Use three BLACK 1-9/16"
FLAT HEAD SCREWS (30S).
3
D267
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(3 used in this step)
Fasten the PENCIL DRAWER BOX FRONT (D473) to
å
the PENCIL DRAWER SIDES (D266 and D267) and
PENCIL DRAWER BRACE (EE). Use three BLACK
1-9/16" FLAT HEAD SCREWS (30S).
www.sauder.com/services
30S
(3 used in this step)
D474
EE
D266
D266
D473
30S
2
D267
Be sure the PENCIL
DRAWER BOTTOM
inserts into the PENCIL
DRAWER BACK groove.
Slide the DRAWER BOTTOM (B28) into the grooves in
å
the DRAWER SIDES (D266 and D267) and PENCIL
DRAWER BACK (D474).
4
The PENCIL DRAWER
FRONT will over hang
the PENCIL DRAWER
BOX FRONT.
P
Fasten the PENCIL DRAWER FRONT (P) to the PENCIL
å
DRAWER BOX FRONT (D473). Use four BLACK 7/8"
LARGE HEAD SCREWS. (17S).
418299
B28
D266
D474
17S
BLACK 7/8" LARGE HEAD SCREW
(4 used in this step)
D473
Page 27