Sauder 418299 Manual Del Usuario página 32

Step 27 Step
Insert a SLIDE CAM (10A) into the SMALL DRAWER
å
SIDES (D20 and D21).
Fasten the DRAWER RIGHT (40CC) to the SMALL DRAWER
å
RIGHT SIDE (D20) and the DRAWER LEFT (40CD) to the
SMALL DRAWER LEFT SIDE (D21). Use four GOLD 5/16"
FLAT HEAD SCREWS (3S) through holes #2 and #4.
NOTE: The screw head in the CAM must be visible through
å
the slotted hole in the SLIDE.
Fasten a PULL (70K) to the SMALL DRAWER FRONT (O).
å
Use two GOLD 1" MACHINE SCREWS (50S).
3
4
70K
50S
GOLD 1" MACHINE SCREW
(2 used in this step)
Page 32
Roller end
1
2
D21
O
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Screw head - turn CAM to line up holes in
10A
the SLIDES with holes in DRAWER SIDES
D20
3
4
3S
418299
10A
Roller end
1
2
www.sauder.com/services