KALLISTA P22134 Guia De Instalacion página 3

Bonnet
Spout
Gasket
1. Install the Faucet
Remove the tee from the shank by turning the tee
counterclockwise.
Remove the shank nut and shank washer from the shank.
Make sure the spout gasket is in place underneath the bottom of
the bonnet.
Insert the shank through the faucet hole in the mounting surface.
From the underside of the mounting surface, slide the shank
washer and shank nut onto the shank.
Thread the shank nut up onto the shank until the shank nut is
flush against the mounting surface. Wrench tighten the shank nut.
Kallista
Shank
Mounting
Surface
Shank
Washer
Shank Nut
Tee
3 1008412-2-C