Publicidad
Idiomas disponibles
Idiomas disponibles
4
Scope of supply
1x side bag carrier, right
1x side bag carrier, left
4x collar screw M8x70
2x cap head screw M6x12
2x nuts M6
Preassembly
- Position left side bag carrier
carrier
(included).
- Mount screws
with nuts
When the side bags are mounted, especially when they are
loaded, greater side wind susceptibility will cause a change in
vehicle handling characteristics while riding, taking curves, and
braking. Exercise caution in high winds.
Due to the changes in vehicle handling characteristics, acceler-
ate gradually to the permitted maximum speed of 120 km/h!
Ensure that the load never exceeds 5 kg per case!
All locks must always be locked while riding!
Use of side bags which are damaged in any way is not permit-
ted!
Make sure that all accessories and luggage items are securely
fastened. Check this regularly!
Assembly
- Remove screws
on both sides.
- Position side bag carriers.
- Mount screws
(included) on both sides with Loctite 243, but do
not tighten yet.
- Tighten screws
to 25 Nm.
- Tighten screws
to 12 Nm.
(included) and right side bag
(all included) but do not tighten yet.
Publicidad
