DJI MATRICE 200 Guia De Inicio Rapido página 6

4. Prepare the Aircraft
Mounting the Landing Gear
Mounting the Propellers
Propellers without
silver rings should
be installed on
motors without
marks.
Mounting the Gimbal and Camera
1 1
Press the gimbal
detach button to
remove the cover.
Make sure to press down the gimbal detach button when rotating the gimbal lock to remove the gimbal and camera. The gimbal lock
should be fully rotated when removing the gimbal for the next installation.
2
Align the white and Rotate the gimbal
red dots and insert lock to the locked
the gimbal. position.
Unfolding the Aircraft
Unfold the frame arm, slide the arm lock to the end of the frame
arm, and rotate it about 90° until the silver line lies within the range
of the icon.
1
Press the propeller
down onto the
mounting plate and
rotate in the lock
direction until
secure.
3
3
2
Propellers with silver
rings should be
installed on motors
with the same color
marks.
Check that the propellers are
secure before each flight.
5