Festo CPX-FB33 Instrucciones Para El Usuario página 17

1 User
The CPX−FB33, CPX−M−FB34 and CPX−M−FB34 bus nodes
for CPX terminals are specified for use as stations (I/O
device) on the PROFINET IO Industrial Ethernet system
exclusively.
The limits specified in the technical data must be complied
with. See the description for P.BE−CPX−PNIO−... bus nodes
and the P.BE−CPX−SYS−... CPX system description for more
detailed information.
Warning
S Switch off the power supply before assembling or
disassembling modules or plugging plug connectors
together or separating them (risk of operative mal
function or damage).
S Use only power sources which guarantee reliable
electrical isolation of the operating voltage in accord
ance with IEC/DIN EN 60204−1. Observe also the gen
eral requirements for PELV circuits in accordance with
IEC/DIN EN 60204−1.
S Connect an earth wire with sufficient cable cross sec
tion to the terminal marked with an earth symbol.
S The CPX bus nodes contain electrostatically sensitive
devices. For this reason, do not touch any compon−
ents. Observe the handling specifications for elec
trostatically sensitive devices.
Note
Only put a completely assembled and wired CPX ter
minal into commission.
Festo CPX−PNIO 1008b English
instructionsEnglish
17