In remote I/O operation mode only:
Set the diagnostics mode 2 with the DIL switch (also
see supplementary information on the next page):
DIL switch 2
DIL 2.1: OFF
DIL 2.2: OFF
(Factory
setting)
DIL 2.1: OFF
DIL 2.2: ON
DIL 2.1: ON
DIL 2.2: OFF
DIL 2.1: ON
DIL 2.2: ON
22
Function
Remote I/O
Without
diagnostics:
I/O diagnostics
interface and
status bits are
switched off
Status bits are
switched on
I/O diagnostic
interface is
switched on
Reserved
Remote controller
Data field size:
8 bytes I/
8 bytes O
Data field size:
8 bytes I/
8 bytes O
Reserved
Reserved
Festo CPX−PNIO 1008b English