Normal operating status:
The PS and PL LEDs shine green, LED TP1 or TP2 shines or
flashes (if interface used); the red LEDs NF and SF do not shine
or blink.
3
Installation instructions
3.1 Assembly
The bus node is assembled in an interlinking block of the
CPX terminal.
1
Screws
Tightening torque
0.9 to 1.1 Nm
2
CPX bus node
3
Interlinking block
with contact rails
Festo CPX−PNIO 1008b English
1
2
3
19