Festo CPV Instrucciones Para El Usuario página 17

1 User
The CPV valve terminal with field bus direct connection
(CPV Direct) is intended exclusively for use as a slave on
the field bus CANopen.
The maximum values specified in the section Technical
specifications" must be observed here. Detailed informa
tion can be found in the manual P.BE−CP−CO3−...
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Use only power units which guarantee reliable
electrical isolation of the operating voltage as per
IEC/DIN EN 60204−1. Observe also the general
requirements for PELV power circuits as per IEC/DIN
EN 60204−1.
S Connect an earth conductor of sufficient diameter to
the connection marked with the earth symbol.
Festo CPV...−GE−CO3−8 0709NH English
instructionsEnglish
17