Sauder 418646 Manual De Instrucciones página 25

Step 19
Insert a SLIDE CAM (10A) into each FILE DRAWER SIDE (D87 and D88).
å
Fasten the EXTENSION SLIDES (MM) to the FILE DRAWER SIDES (D87
å
and D88). Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Repeat this step for the other FILE DRAWER, the UPPER DRAWER, and
å
the MIDDLE DRAWER. Use the LONG DRAWER SLIDES (TT and UU) for
the UPPER and MIDDLE DRAWERS.
MM
3
4
www.sauder.com/services
Open end
1
2
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(16 used in this step)
10A
D88
3S
418646
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D87
2
MM
3
4
Open end
1
Page 25