Sauder 418646 Manual De Instrucciones página 27

Step 21
Carefully stand your unit upright.
å
Insert a GROMMET CAP (1P) into a GROMMET (10P) and insert into the large holes of the TOP (E).
å
To insert a fi le drawer into your unit, line up the EXTENSION SLIDES on the drawer with the
å
EXTENSION RAILS on the unit and push the drawer into the unit until the drawer is fully inserted. The
drawer will push in hard until it is all the way in, then it will slide in and out easier.
To insert the remaining drawers into your unit, tip the front of the drawer down and drop the rollers on
å
the drawer behind the rollers on the unit. Lift the front of the drawer up and slide it into the unit. Repeat
this step to insert the KEYBOARD SHELF (L).
NOTE: The small DRAWER FRONT may need adjustment. To adjust the small DRAWER FRONT,
å
loosen the SCREWS that attach the small DRAWER FRONT to the DRAWER FRONT BRACKETS. Make
adjustments and tighten the SCREWS.
NOTE: To adjust the other drawers see the next step.
å
Pro Tip: Lift with your
legs. And, you know,
your arms.
20 lbs.
www.sauder.com/services
1P
10P
100 lbs.
E
418646
25 lbs.
L
25 lbs. each
10 lbs.
15 lbs.
Page 27