Seat Slide Replacement; Torsion Bushing Upright Assembly - Steelcase 460 Rapport Manual Para El Reemplazo

J. Seat Slide Replacement
1.
Refer to sections (H) and (I) to remove base,
arms, cowls, springs, spring bracket, seat screws,
seat hook screws, and seat hooks. To unhook
cable from lock assembly, refer to section (L).
2.
Lift chair control from seat slide assembly once
all prior items have been removed.
3.
Remove screws from Seat Slide Assembly
(metal plate on seat bottom). Lift assembly from
cushion.
4.
Realign new seat slide assembly on cushion
and fasten with screws.
5.
Reassemble chair in reverse order.
K. Torsion Bushing Upright
Assembly
1.
Remove entire back assembly from uprights.
Refer to (G) to remove back and (I) sections for
chair control removal.
NOTE: It is not necessary to remove base.
2.
Remove (2) screws holding brackets for the
upright assembly in place. Remove from chair
control.
3.
Making sure brackets fit notches on the chair
control assembly, realign new upright assembly.
Page 17 of 60
939504522 Rev G