Legal Notices; Safety Precautions - HP DesignJet 5 Serie Información Preliminar

Introductory Information
Other sources of information
A complete User's Reference Guide to your printer is available on the CD that comes with your printer. That guide
provides information on the following topics:
• Introduction to your printer
Using paper
•
• Using the ink system
• Using the front panel
• Using printer options
• Troubleshooting
• Maintaining the printer
• Installing expansion cards
Printer specifications
•
• Ordering accessories
You can also find legal and warranty information on the CD. Further information is available at HP's support Web
site (http://www.hp.com/go/knowledge_center/).

Legal notices

The information contained herein is subject to change without notice. The only warranties for HP Products and
services are set forth in the express warranty statement accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.

Safety precautions

The following precautions ensure the proper use of the printer and prevent the printer from being damaged. Follow
these precautions at all times.
• Use the power supply voltage specified on the nameplate. Avoid overloading the printer's electrical outlet with
multiple devices.
• Ensure that the printer is well grounded. Failure to ground the printer may result in electrical shock, fire and
susceptibility to electromagnetic interference.
• Do not disassemble or repair the printer yourself. Contact your local HP Service Representative for service, see the
User's Reference Guide.
• Use only the electrical cord supplied by HP with the printer. Do not damage, cut or repair the power cord. A
damaged power cord can cause fire or electric shock. Replace a damaged power cord with an HP-approved
power cord.
• Do not allow metal or liquids (except those used in HP Cleaning Kits) to touch the internal parts of the printer.
Doing so may cause fire, electric shock or other serious hazards.
• Power off the printer and unplug the power cable from the power outlet in any of the following cases:
• When placing your hands inside the printer
• If there is smoke or an unusual smell coming from the printer
• If the printer is making an unusual noise not heard during normal operation
• If a piece of metal or a liquid (not part of cleaning and maintenance routines) touches internal parts of the
printer
• During a thunderstorm
• During a power failure
1 Introductory Information
EN