Publicidad
Please read instructions carefully before installation.
Check the contents of kit. Contact your YAKIMA dealer if any parts appear missing or damaged.
Place these instructions in the vehicle's glove box after installation is complete.
1
CONFIGURATIONS.
The light bracket base can be mounted to your bar or Platform orientated up or down as shown.
Side mounted with arm
angled down
2
ATTACH BUMP ON TO BRACKET BASES (DOWNWARDS ORIENTATION ONLY).
The bump on tape is to be applied to the inside surface of down facing
bracket bases only. Remove backing tape from bump on strips and
Instruction #28-13-336 Rev.3 - Page 2 of 13
Side mounted with
arm angled up
Top mounted
is not required for
already protected.
Bottom mounted
NOTE: This step
or any mounting
surface that is
2X
Publicidad
