Página 1
5-Shelf Bookcase NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. with Doors PLEASE READ AND KEEP FOR FUTURE REFERENCE. Model 423400 English pg 1-18 Français pg 19-21 Español pg 22-24 Share your journey! Lot # 531745 07/18/19 Purchased: __________________...
Página 2
UPPER END MOLDING (2) LOWER RIGHT END (1) DOOR (2) DOOR ADJUSTABLE SHELF (1) LOWER LEFT END (1) ADJUSTABLE SHELF MOLDING (2) LARGE BACK (1) TOP (1) VALANCE (1) SMALL BACK (1) BOTTOM (1) SHELF MOLDING (1) Page 2 www.sauder.com 423400...
Página 5
D), TOP (E), BOTTOM (F), SHELF (G), and ADJUSTABLE SHELVES (H). (37 used) Arrow Arrow Arrow Arrow Hole Arrow The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. 423400 www.sauder.com Page 5...
Página 6
Turn thirty-seven CAM SCREWS (2) into the exact holes å shown in the ENDS (A, B, C, and D), SHELF (G), SHELF MOLDINGS (J and L), VALANCE (K), BASE (M), and UPPER END MOLDINGS (N). (37 used) Do not use the through holes. Page 6 www.sauder.com 423400...
Página 7
H I D i t h f a c S u r Edge with HIDDEN CAMS I D D u t H i t h o f a c S u r Edge with HIDDEN CAMS 423400 www.sauder.com Page 7...
Página 8
SILVER 1-1/2" FLAT HEAD SCREWS (10). Finished edge S u r f a c i t h H I D D E N Edge with HIDDEN CAMS SILVER 1-1/2" FLAT HEAD SCREW (4 used in this step) Page 8 www.sauder.com 423400...
Página 9
H I D D E N Edge with HIDDEN CAM I D D u t H i t h o f a c S u r Edge with HIDDEN CAMS 423400 www.sauder.com Page 9...
Página 10
Step 6 Fasten the LOWER ENDS (C and D) to the SHELF (G). å Tighten four HIDDEN CAMS. Just think. The sooner you do this, the sooner you do something else. Page 10 www.sauder.com 423400...
Página 11
(46 used in this step) Do not fasten NAILS along this edge until the LARGE BACK (P) is overlapping the SMALL BACK (Q). The LARGE BACK (P) will overlap the SMALL BACK (Q) along the SHELF (G). 423400 www.sauder.com Page 11...
Página 12
Fasten the SHELF MOLDING (L) to the SHELF (G). å Tighten three HIDDEN CAMS. Fasten the BASE (M) to the LOWER ENDS (C and D) and å BOTTOM (F). Tighten fi ve HIDDEN CAMS. Curved edge Curved edge These surfaces should be even. Page 12 www.sauder.com 423400...
Página 13
Step 9 With your hammer, gently tap the TACK GLIDES (7) into the å bottom edges of the LOWER ENDS (C and D) and BASE (M). 423400 www.sauder.com Page 13...
Página 14
Fasten an ADJUSTABLE SHELF MOLDING (J) to one of å the ADJUSTABLE SHELVES (H). Tighten three HIDDEN CAMS. Repeat this step for the remaining ADJUSTABLE å SHELF (H) and ADJUSTABLE SHELF MOLDING (J). These surfaces should be even. Page 14 www.sauder.com 423400...
Página 15
O) onto the METAL PINS in the ENDS (A, B, C, and D). Peel the BUMPERS from the BUMPER CARD (8) and stick them å onto the center of the DOOR ADJUSTABLE SHELF (O). (12 used) 423400 www.sauder.com Page 15...
Página 16
Step 12 Fasten the HINGES (4) to the DOORS (I). Use eight å SILVER 1/2" PAN HEAD SCREWS (12). SILVER 1/2" PAN HEAD SCREW (8 used in this step) Page 16 www.sauder.com 423400...
Página 17
SILVER 1/2" PAN HEAD SCREWS (12). Fasten the PULLS (5) to the DOORS (I). Use four SILVER å 11/16" MACHINE SCREWS (11). SILVER 1/2" PAN HEAD SCREW (8 used in this step) SILVER 11/16" MACHINE SCREW (4 used in this step) 423400 www.sauder.com Page 17...
Página 18
Use the 5/8" screw through the small hole in a bracket and into the back edge of the TOP (E). Small hole No load 25 lbs. 25 lbs. 30 lbs. 25 lbs. To cover HIDDEN CAMS 40 lbs. Page 18 www.sauder.com 423400...
Modèle 423400 Bibliothèque 5 tablettes avec portes Utilisez les instructions d’ a ssemblage en français avec les NOUS SOMMES LA POUR VOUS AIDER! schémas étape par étape du manuel d’instruction en anglais. Nous faisons de notre mieux pour nous assurer que votre meuble Chaque étape en français correspond à...
Página 20
Fixer les EXTRÉMITÉS INFÉRIEURES (C et D) au DESSOUS (F). Serrer DESSOUS (F). Serrer cinq EXCENTRIQUES ESCAMOTABLES. quatre EXCENTRIQUES ESCAMOTABLES. ÉTAPE 6 Fixer les EXTRÉMITÉS INFÉRIEURES (C et D) à la TABLETTE (G). Serrer quatre EXCENTRIQUES ESCAMOTABLES. Page 20 www.sauder.com 423400...
Página 21
TABLETTE RÉGLABLE DE PORTE (O). Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. ÉTAPE 12 Fixer les CHARNIÈRES (4) aux PORTES (I). Utiliser huit VIS TÊTE GOUTTE DE SUIF 13 mm ARGENTÉES (12). 423400 www.sauder.com Page 21...
EXCÉNTRICO ESCONDIDO ......37 su referencia futura. Si EXTREMO IZQUIERDO SUPERIOR ....1 BIELA DE EXCÉNTRICO ........37 necesita ponerse en contacto con Sauder en EXTREMO DERECHO INFERIOR .....1 ESPIGA DE METAL ..........12 cuanto a esta unidad, EXTREMO IZQUIERDO INFERIOR ....1 BISAGRA ................4 refi...
Página 23
Fije la MOLDURA DE ESTANTE (L) al ESTANTE (G). Apriete tres EXCÉNTRICOS ESCONDIDOS. Fije los EXTREMOS INFERIORES (C y D) al FONDO (F). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. PASO 6 Fije los EXTREMOS INFERIORES (C y D) al ESTANTE (G). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. 423400 www.sauder.com Page 23...
Página 24
Esto completa el ensamblaje. Limpiar con un trapo húmedo. centro del ESTANTE AJUSTABLE DE PUERTA (O). Seque con un paño. PASO 12 Fije las BISAGRAS (4) a las PUERTAS (I). Utilice ocho TORNILLOS PLATEADOS DE CABEZA REDONDA de 13 mm (12). Page 24 www.sauder.com 423400...
Página 25
Les téléviseurs peuvent être un téléviseur. cet eff et. particulièrement lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 423400 www.sauder.com Page 25...
Página 26
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 26 www.sauder.com 423400...
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Walmart.com in the product detail page. General Conformity Certifi cate 1. This certifi cate applies to the Sauder Global Sourcing Product identifi ed by this Instruction Book. 2. This certifi cate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).