Footwell
Side Wall Drain
Toe Tap Drain
Accumulator
Level Sensors
Drain Valve
Bath Features
Door Switch - Used to open the side wall drain. Push the door switch once and the water will
automatically begin to drain after bathing. For faster water removal the toe tap must also be
manually opened. Pushing the switch a second time closes the drain.
Controller - Provides power to the door assembly, switches, level sensors and drain valve.
Handle - Squeeze the handle to lower the door after the seal has fully deflated.
Door - Raise and lower to permit easy movement in and out of the bath. The door also contains an
inflatable seal and electronics to make the bath watertight when the door is raised.
Access Panel - Removable panel that allows access to serviceable components from the front of the
bath.
Receptor Tray - The drip tray collects water from the accumulator drain line and excess water that
escapes over the top of the seal in the door, removing the water through a dedicated drain.
Drain Valve - The drain valve is connected to the side wall drain and is designed to quickly empty
the water from the bath. The bath can be emptied in approximately 2 minutes or less when used
along with the toe tap drain.
Grab Bar - The grab bar is a handhold to assist the bather when entering and exiting the bath.
Toe Tap Drain - Secondary drain that is manually controlled. When used at the same time as the
drain valve, the bath can be emptied in approximately 2 minutes or less.
Overflow - Helps prevent bath from overfilling.
Footwell - Used to temper the water before entering the bath or washing feet with the door
lowered.
Kohler Co.
Grab Bar
Overflow
Door Switch
Handle
Controller
Model and Serial Number Label
Access Panel
3
Heated Surface (If Equipped)
Limit Switch (2)
Door (with Seal)
Receptor Tray and Drain
1128532-5-H