Philips HTS8000S/37 Guía De Uso Rápido

QUICK USE GUIDE
1
what's in the box
A
HTS8000S DVD system, AV Subwoofer,
SonoWave Speakers
C
D
Junction Box
F G
Bracket Bracket
(for mounting the main (for mounting the
SonoWave Speakers on
DVD system on the wall)
the wall)
3
connect main DVD system, AV subwoofer, Junction Box and
SonoWave Speakers
3a
Place the FM antenna on
the wall where the
reception is best.
3f
Connect the
power cords
to the AC
power outlet.
Pull up the AV subwoofer's
feet and rotate outwards.
B
Remote control
E
VGA cable Power cord
(use this cable to connect (use this cable to connect
the Junction Box to the AV subwoofer to the
AV subwoofer) AC power outlet)
H I
Screws and
wall plugs
(for secure the bracket (velcro strips to fix the
on the wall) Junction Box and rubber
feet for AV subwoofer)
(2x)
(2x)
3d
12nc: 3139 115 23641
2
SUBWOOFER
velcro strips,
rubber feet
Note:
(4x)
3b
Connect the Interconnect
cable to the Junction Box.
Use the VGA cable to
connect the Junction Box
with the AV subwoofer.
Ensure that this
portion is fully
inserted into the jack.
3e
Connect the SonoWave
speakers to the AV
subwoofer. (refer to next
page for "Speaker system
setting")
placement
For optimum sound performance, the SonoWave
speakers must be placed at the equal distance from
the TV, at the height of ear level and faced straight
ahead towards the listening area.
OUT
VIDEO
AUDIO
FRONT L
HTS8000S
TV
IN
3c Connect the
audio/video cables to
TV (the Audio cables
must be connected
to the AUDIO
Output on the TV.)
FRONT R