TEFAL masterchef compact QB205166 Manual De Instrucciones página 8

• Wait for the appliance to come to a complete stop and unplug it.
• Remove the lid (b2).
• Using the button (a3), release the multi-function head (a4) and raise it to the upper position.
• Pull the accessory (c1), (c2) or (c3) to remove it from the multi-function head.
• Remove the bowl.
2 - BLENDING/MIXING (DEPENDING ON MODEL)
Depending on the nature of the food, you can use the blender (d) to prepare up to 1 L of thick mixtures
and 0.75 L of liquid mixtures.
ACCESSORIES USED:
- Blender jug (d)
EN
2.1 - ASSEMBLING THE BLENDER JUG ACCESSORIES (DIAGRAMS 2):
• Place the multi-function head (a4) in the horizontal position: press the button (a3) and manually lower
the multi-function head (a4) until it locks (the button (a3) returns to its initial position).
• Pull the cover (a6) upwards to remove it from the high-speed outlet (a5).
• Make sure that the appliance is switched off before fitting the blender jug (d).
• Fit the blender jug (d) on the high-speed outlet (a5). Four positions are possible.
• Place the food in the blender jug, and lock the lid (d2) fitted with the measuring cap (d3), by rotating
it clockwise.
2.2 - USAGE
• Start by turning the selector (a1) to the desired speed according to the recipe.
Use the "Pulse" position for better mixing control and for a better blending of your preparation.
You can add food after removing the measuring cap (d3) from the lid (d2) during preparation.
• To stop the appliance, turn the selector (a1) to "0".
Tips:
- Use the blender jug (d) at speed "3" to "4".
Maximum operating time: 3 min.
You can prepare:
- finely blended soups, sauces, stewed fruit, milkshakes and cocktails.
- liquid batter (pancake, fritters, clafoutis and custard flans).
- If ingredients stick to the sides of the jug when mixing, stop the appliance. Remove the blender jug,
and push the food down onto the blades using a spatula and put your blender jug back to continue
your preparation.
- Never fill the blender jug with boiling liquid.
- Never run the blender empty.
- Always use the blender jug with its lid.
- Never remove the lid before the blades have stopped completely.
- Always pour liquid ingredients into the blender jug first before adding solid ingredients.
2.3 - DISMANTLING THE ACCESSORY
• Wait for the appliance to come to a complete stop and unplug it. Remove the blender jug. Put back the
cover (a6) on the outlet (a5).
3 - GRATING/SLICING (DEPENDING ON MODEL)
ACCESSORIES USED:
7
- Vegetable slicer attachment (e1)
- Drum body (e2) + pusher (e3)
- Drums (depending on model)
- Drum retaining collar (e4)
3.1 - ASSEMBLING THE ACCESSORIES (DIAGRAMS 3)
• Press the button (a3) to release the multi-function head (a4) and raise it until it locks in place.
• Fit the attachment (e1) under the multi-function head (a4): align the left-hand mark on the attachment
(e1) with the mark on the multi-function head (a4), and turn until the right-hand mark on the attachment
(e1) is aligned with that of the multi-function head (a4).
• Insert the chosen drum into the body, and make sure that it is fully engaged in the body. Fit the drum
retaining collar (e4).
• Facing the attachment (e) outlet, insert the drum body (e2) inclined to the right, aligning the two
bayonets in the drum body with the two notches in the attachment. Push it home. If you find it difficult
to fit it, slightly turn the shaft (e2.1) of the drum body and push it again. Turn the drum body anti-
clockwise until it latches with the feed tube in the vertical position.
• Lock the bowl (b1) (anti-clockwise) on the appliance.
• Make sure that the cover (a6) is correctly in place on the high-speed outlet (a5).
3.2 - USAGE AND TIPS:
• Run the appliance by turning the selector (a1) to speed "3".
• Maximum operating time: 10 min.
• Place the food in the feed tube on the body and press down with the pusher (e3). Never push the
ingredients with your fingers or any other utensil.
• To stop the appliance, turn the selector (a1) to "0". Wait for the appliance to come to a complete stop
and unplug it.
• Unlock the drum body in the reverse order of the assembly.
• With the cones, you can prepare up to 2 kg of:
- Grate coarsely C (e6) / grate finely D (e7): carrots, celery, potatoes, cheeses, etc.
- Slice thickly A (e5): potatoes, carrots, cucumbers, apples, beetroot, etc.
- Parmesan E (e8): potatoes, parmesan, etc.
- Potato shredder R (e9): potatoes.
Maximum quantity: 2 kg.
4 - CHOPPING SMALL QUANTITIES (DEPENDING ON MODEL)
ACCESSORY USED:
- Assembled mini-mincer.
With the mini-mincer, you can chop in few seconds by pulsing: dried figs, dried apricots, etc.
Quantity / max time: model QA100: 50g / 8 sec, model QA200: 90g / 8 sec.
The mini-mincer is not designed for hard products like coffee.
8
EN