Tabla de contenido
Publicidad
STEP 4
Attach the base unit to the slide
set by releasing the Blum triggers
and sliding the unit on to the slide
base (See Figure 4).
Note: You will hear a distinct
"click" when properly engaged.
DOOR MOUNT
INSTRUCTIONS
Once the product is installed you
want to install the cabinet door for
easy access.
Make sure the door brackets are
lined up with the thick portion of
the cabinet door (See Fig. 6).
Loosen the lock nuts (3/8" wrench)
inside the front wall of the unit to
adjust the brackets horizontally
(See Fig 7).
Note: Use provided squares
throughout the worksheet to
record each measurement.
STEP 6
Measure the distance from the
bottom edge of the opening to the
slotted holes (See Figure 8).
INSTALLATION INSTRUCTIONS: VANITY OUTLET GROOMING ORGANIZER
Figure 4
Figure 6
FIG. 8
Figure 7
Lock Nut
Distance
to
hole
locations
T-Nut Screw for
Tilt Adjustment
3
Publicidad
Tabla de contenido
