Festo MH1 Serie Manual De Instrucciones página 15

1 User instructionsEnglish
The miniature valves type MH1 and MH2 are intended
exclusively for controlling pneumatic actuators. When
used together with commercially available components,
such as actuators, the specified limits for pressures, tem-
peratures, electrical data, torques etc. must be observed.
National and local safety regulations must also be ob-
served.
Miniature valves may only be fitted by trained personnel.
Warning
S Before undertaking installation or maintenance work,
switch off the power supply for the valve solenoid
coils and the compressed air supply.
Please note
Commission only a miniature valve terminal which has
been fitted and wired completely.
The valves are marked as follows:
Designation Function
2/2G 2/2-way valve, basic position closed
3/2G 3/2-way valve, basic position closed
3/2O 3/2-way valve, basic position open
Festo MH.-... 0108NH English 15