Installation - ETI Solid State Lighting GROW ELITE GL-72-MV Guía De Uso Y Cuidado

installation

Select a suitable location that can support the weight of the LED Grow Light.
1
Mounting to drywall
□ Drill two holes large enough to clear the closed flaps of
the butterfly nut on the toggle bolt (not included). Make
sure to fasten the toggle bolt into the butterfly nut
before inserting the flaps into the ceiling.
□ Tighten the toggle bolt.
nOte: If using eye hooks in the ceiling instead, attach
the aircraft cables with S hooks.
3
Attaching the light fixture to aircraft cable
□ Attach the hook at the bottom of the aircraft cable (AA - sold
separately) to the grow light (A).
□ Repeat this step on the other side of the fixture.
□ Adjust aircraft cables to level the light fixture.
nOte: Product can also be suspended using metal chain and S hooks
with weight bearing capacity exceeding 6 lbs (2.7 KG). S hooks must be
≤ 0.1 in. (2.5 mm) to fit the holes in the grow light (A).
2
Mounting to wood
□ Drill two 1/16 in. diameter holes in the ceiling to
accommodate hook screws (not included). Make sure to
fasten the combo wood-machine end into the metal hook.
□ Tighten the hook screw into the wood.
nOte: If using eye hooks in the ceiling instead, attach
the aircraft cables with S hooks.
4
Aircraft Cable
A