Pre-Installation; Planning Installation; Tools Required; Package Contents - ETI Solid State Lighting 54320142 Guía De Uso Y Cuidado

Pre-Installation

PLANNING INSTALLATION

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents
list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement
parts.
NOTE: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
NOTE: Two people are recommended for the optional surface mount installation of this light fixture.

TOOLS REQUIRED

Phillips
Screwdriver
Wire
Strippers

PACKAGE CONTENTS

Part Description
A LED Flat Panel

HARDWARE AVAILABLE TO PURCHASE FOR OPTIONAL INSTALLATION METHODS

NOTE: Hardware kits for surface mounting and suspension mounting are sold as separate accessories. Please contact ETiSSL Customer
Service 1-855-384-7754 for additional information.
NOTE: Hardware not shown to actual size.
Part Description
AA Aircraft Cable for
Suspension Mounting
BB Surface Mounting Kit for
2' x 2' Flat Panel
CC Surface Mounting Kit for
2' x 4' Flat Panel
Safety
Goggles
Electrical
Tape
Quantity
1
Quantity Part #
2 95457326101
1 FPE-SMK-22
1 FPE-SMK-24
Gloves
Power Drill
with drill bits
A
Surface Mounting Kits - BB and CC
3
Please contact 1-855-384-7754 for further assistance.
Ladder
AA
x 2 x 12
x 2
x 4
www.ETiSSL.com