sanindusa 540637111 Instrucciones De Montaje página 48

//FAUCET INSTALLATION
4º
step
connecting the power source
1 – Connect the power source:
a. For battery models
contains an internally mounted battery. To activate it, remove
the sticker from the sensor.
MIXER/TAP
w/battery w/transformer
sticker
b. For transformer models
plug the transformer into the electricity socket and connect
the connectors.
2 – Wait a few seconds before activating the faucet.
3 – If the range is unsatisfactory, refer to the section titled
"Range adjustment".
48 49
//